Login or Register for FREE!
Subelement E

Distress, Urgency & Safety Communications:

Section 29

Sending a Distress Alert

What is usually the first step for a GMDSS Radio Operator to take when initiating a Distress priority message via Inmarsat?

  • Correct Answer
    By pressing a "Distress Button" or "Distress Hot Key(s)" on the equipment.
  • By dialing the correct code on the telephone remote unit.
  • By contacting the LES operator and announcing a Distress condition is in existence.
  • By contacting the LES operator using the radiotelephone Distress procedure "Mayday"... etc.

What is usually the first step for a GMDSS Radio Operator to take when initiating a Distress priority message via Inmarsat?

(A) By pressing a "Distress Button" or "Distress Hot Key(s)" on the equipment.

It is the actual step to execute. The Distress call before this system was in place, was to transmit the SOS signal on 500 kHz, by a trained radio operator in the Morse Code.

For more information, please see Furuno's pdf GMDSS Guide

Last edited by markadlerdallas. Register to edit

Tags: none

Which of the following statements is true regarding Distress alerting under GMDSS?

  • Ship to shore Distress alerts are used to alert other ships in port of navigational hazards.
  • Correct Answer
    The Distress alert should identify the station in Distress and its position & time of position update. Also, the alert may include the nature of the Distress, the type of assistance required, or the course and speed of the mobile unit.
  • Ship-to-ship Distress alerts are used to alert other ships in the vicinity of navigational hazards and bad weather.
  • The vessel nearest to the emergency must notify the Coast Guard before leaving the vicinity.

Which of the following statements is true regarding Distress alerting under GMDSS?

(B). The Distress alert should identify the station in Distress and its position & time of position update. Also, the alert may include the nature of the Distress, the type of assistance required, or the course and speed of the mobile unit.

§ 80.314 Distress communications.

47 CFR 80.314(c) The radiotelephone distress call consists of:
(1) The distress signal MAYDAY spoken three times;
(2) The words THIS IS;
(3) The call sign (or name, if no call sign assigned) of the mobile station in distress, spoken three times;
(4) Particulars of the station's position;
(5) The nature of the distress;
(6) The kind of assistance desired; and
(7) Any other information which might facilitate rescue, for example, the length, color, and type of vessel, or number of persons on board.

For more information, please see Code of Federal Regulations Title 47 Chapter I Subchapter D Part 80 Distress communications.

Last edited by markadlerdallas. Register to edit

Tags: none

If a GMDSS Radio Operator initiates a DSC Distress transmission but does not insert a message, what happens?

  • The transmission is aborted and an alarm sounds to indicate this data must be provided by the operator.
  • The transmission is not initiated and "ERROR" is indicated on the display readout.
  • Correct Answer
    The transmission will be made with "default" information provided automatically.
  • The receiving station will poll the DSC unit of the vessel in Distress to download the necessary information.

If a GMDSS Radio Operator initiates a DSC Distress transmission but does not insert a message, what happens?

(C). The transmission will be made with "default" information provided automatically.

From RECOMMENDATION ITU-R M.541-9 titled Operational procedures for the use of digital selective-calling equipment in the maritime mobile service

3.1 Transmission by a mobile unit in distress

3.1.2 If the position of the ship cannot be entered, then the position information signals shall be transmitted automatically as the digit 9 repeated ten times.

From Code of Federal Regulations Title 47 Chapter I Subchapter D Part 80 Subpart W Operating Procedures for Distress and Safety Communications: 47 CFR 80.5 “Automatic Identification Systems (AIS)”

A maritime navigation safety communications system standardized by the International Telecommunication Union (ITU) and adopted by the International Maritime Organization (IMO) that provides vessel information, including the vessel's identity, type, position, course, speed, navigational status and other safety-related information automatically to appropriately equipped shore stations, other ships, and aircraft; receives automatically such information from similarly fitted ships; monitors and tracks ships; and exchanges data with shore-based facilities.

Last edited by markadlerdallas. Register to edit

Tags: none

Repetition of a DSC Distress alert is normally automatic if not acknowledged after a delay of:

  • 2 - 5 minutes
  • 10-15 minutes
  • 1 - 2 minutes
  • Correct Answer
    3.5 - 4.5 minutes

Repetition of a DSC Distress call is normally automatic if not acknowledged after a delay of:

(D) 3.5 - 4.5 minutes

3.1.3.1 Single frequency call attempt A distress alert attempt should be transmitted as 5 consecutive calls on one frequency. To avoid call collision and the loss of acknowledgements, this call attempt may be transmitted on the same frequency again after a random delay of between 3½ and 4½ min from the beginning of the initial call.

For more details, please see RECOMMENDATION ITU-R M.541-9 titled Operational procedures for the use of digital selective-calling equipment in the maritime mobile service

Last edited by markadlerdallas. Register to edit

Tags: none

For a MF/HF DSC Distress alert which statement is FALSE?

  • Correct Answer
    It always requests J3E Voice follow-on communications so other vessels can hear the Mayday.
  • It will send the minimal necessary information using the "Distress Button" or "Distress Hot Key."
  • It will send a more detailed Distress format if time permits and operator data entries are correctly performed.
  • It does not contain all the information normally of interest in On-scene Distress communications.

For a MF/HF DSC Distress call which statement is FALSE?

(A). It always requests J3E Voice follow-on communications so other vessels can hear the Mayday.

T R U E :

MF/HF DSC Distress call:

  • will send the minimal necessary information using the "Distress Button" or "Distress Hot Key."

  • will send a more detailed Distress format if time permits and operator data entries are correctly performed.

  • does NOT contain all the information normally of interest in on-scene Distress communications.

Last edited by markadlerdallas. Register to edit

Tags: none

Which statement regarding an MF/HF DSC Distress alert is true:

  • Follow on communications should be presumed to take place on the SITOR (NBDP) frequency associated with the specific DSC frequency used.
  • Correct Answer
    Follow on communications should be presumed to take place on the voice frequency associated with the specific DSC frequency used.
  • An alternate emission and frequency may be specified for follow-up communications by the vessel in the original Distress alert.
  • Both the nature of Distress and the alternate emission and frequency must be specified for follow-up communications in the original Distress alert.

Which statement regarding an MF/HF DSC Distress call is TRUE:

(B). Follow on communications should be presumed to take place on the voice frequency associated with the specific DSC frequency used.

3.1.3 Distress alert attempt
At MF and HF a distress alert attempt may be transmitted as a single frequency or a multi-frequency call attempt. At VHF only single frequency call attempts are used.

For more details, please see RECOMMENDATION ITU-R M.541-9 titled Operational procedures for the use of digital selective-calling equipment in the maritime mobile service

Last edited by markadlerdallas. Register to edit

Tags: none

Go to 28 Go to 30